1102 lbs Attic Ladder Wall Mounted Attic Stairs w/Pull Down System,Home Storage

Description

Anti slip rubber ladder feet The bottom of this folding attic ladder is equipped with anti slip rubber ladder feet, made of high elasticity rubber material, with a surface covered with micrometer sized suction cup patterns. When in contact with the ground, it automatically adheres and levels, and can form strong adhesion on various materials such as tiles, wooden floors, cement floors, etc., effectively preventing the stairs from moving or sliding when opened or closed. Rubber material combines wear resistance and shock absorption characteristics, buffering impact force when landing, reducing noise transmission, and protecting the ground from damage. solid ri vet All metal components are secured with solid rivets and have passed high-frequency vibration testing without loosening or cracking. The cold-pressing process eliminates the thermal damage caused by high-temperature welding, increasing connection strength by 20% compared to traditional welding methods. Even under extreme loads or frequent opening and closing cycles, the parts of the wall-mounted attic ladder remain tightly interlocked, fundamentally eliminating the risk of solder joint detachment and building a rock-solid overall structure. Fixed arm rest The surface of the folding ladder features a 3mm thick non-slip matte coating, ensuring a secure and comfortable grip. Internally, the armrest is built around a hollow steel-tube frame filled with shock-absorbing rubber, capable of withstanding longitudinal tensile forces of up to 1102 pounds without deformation. This design effectively shares the body's load during stair ascent and descent, alleviating pressure on the knees and lower back. This foldable wall mounted attic staircase is particularly suited for heavy lifting or use when mobility is limited, delivering a safe and comfortable stair-climbing experience. strut The folding support strut is constructed from reinforced steel. An angle-adjustment knob is mounted on its surface, enabling precise tilt calibration from 0° to 60°. This ensures the unfolded staircase remains perpendicular to the ground, providing stable support even on slightly uneven surfaces. A reinforced midsection enhances the strut's bending resistance, allowing a single support to bear a static load of up to 551 pounds. Combined with its S-shaped curves and solid rivet connections, it forms a three-dimensional load-bearing system capable of comprehensively adapting to complex installation environments. Baked paint spring The core power component—the coated spring—has undergon many times fatigue testing and certification. Its surface is protected by a thick epoxy coating and has passed salt spray test without any signs of rust, offering three times the corrosion resistance of conventional springs.The spring tension is precisely calibrated to match the weight of the staircase, ensuring a smooth, controlled descent without jerking when unfolded. When retracting, the wall mounted staircase with pull down system requires only a light push of 3kg to return automatically to its stored position.Combined with hydraulic damping technology, operating noise is kept below 45 dB, allowing elderly and female users to effortlessly open and close it with one hand. Even after a decade of use, the mechanism remains consistently smooth. Hand pulled lock buckle The bottom hand pulled lock buckle made of 304 stainless steel material has an accuracy error of less than 0.5mm between the lock tongue and the wall slot. When locked, it forms a 90 ° vertical grip and can withstand a horizontal tension of 100 pounds without detachment. In the unfolded state, the lock buckle and support rod form a triangular stable structure, effectively resisting the lateral sway of the stairs; After storage, the lock buckle automatically hides in the ceiling plane, with a surface level with the wall, without dust accumulation or collision, combining stability during use with aesthetics after storage Anti slip pedal The surface of the anti-skid pedal is treated with special technology, presenting a high-density diamond shaped concave convex texture. The friction coefficient is 40% higher than that of ordinary flat pedals, and it can still firmly grasp the sole in humid environments, effectively reducing the risk of slipping. The pedal width is up to 5.3 inch, designed with ergonomic stride and rounded edges to avoid collisions. Equipped with a anti slip front edge, our foldable staircase can maintain a stable center of gravity even when carrying heavy objects up and down, providing all-weather safety protection for the elderly, children, and people with limited mobility. S-shaped bent tube Breaking the limitations of traditional straight rod structures, the vertical pressure is evenly distributed to the two side supports through arc-shaped mechanical design, which increases the deformation resistance by 30% and can stably bear a dynamic load of 1102 pounds. The unique S-shaped curve not only enhances structural toughness, but also adapts to different tilt angles. After installation, it naturally adheres to the wall, balancing mechanical performance and spatial adaptability. Even with long-term high-frequency use, it is not easy to produce metal fatigue, laying a solid foundation for the core load-bearing structure of stairs. Anti loosening screw cap with embedded anti slip pad The key connections of folding stairs utilize anti-loosening screw caps with built-in non-slip pads. Inside each cap, a highly elastic silicone anti-slip gasket is embedded, creating a physical grip with the screw threads. This, combined with the external serrated anti-slip pattern, forms a dual-locking mechanism capable of withstanding high-frequency vibration amplitudes, improving anti-loosening performance by 50% compared to standard screws. Even under long-term vibration from repeated opening and closing, this ensures that the connections between the pedal, armrest, and support frame remain consistently secure, eliminating potential safety risks at every detail. Scope of Application Ladder Pull Down System for Attic space Ladder Pull Down System for Duplex/loft unit type Ladder Pull Down System for Basement or storage room Ladder for Office attic mezzanine Ladder Pull Down System for Exhibition halls Ladder Pull Down System for Warehouse and factory mezzanine Ladder Pull Down System for Temporary buildings and disaster relief sites Package Includes 1 × 12 Steps Attic Ladder 1 × Pull rod 2 × Anti - slip Rubber pad 2 × Handrails 12 × Solid rivets 2 × Baked paint spring 2 × Support bar 1 × Aluminum magnesium alloy backplate 10 FT Wall-Mounted Attic Ladder with Pull Down System Material: Titanium Magnesium Alloy Installation method: Wall mounted Gross weight: 66 lbs Load capacity: 1102 pounds Pedal thickness: 0.9 inches/2.5 cm Pedal width: 5.3 inches/ 13.5 centimeters Wall mounted frame size: 23.6 * 27.5 inches/60 * 70 centimeters Expanded vertical height: 10F T/118 inches/3 meters Extended extension length:11.15FT/ 133.8 inches/3.4 meters More Details : Sturdy and Durable : Crafted from high-strength titanium-magnesium alloy, this pull-down attic stair supports up to 1102 lbs and resists bending or deformation. This wall mounted attic ladder includes a safety lock to prevent accidental retraction due to vibration or external force. With a multi-point support structure and thickened steps, the attic staircase ensures stable and secure climbing. Ideal for daily use or transporting heavy items—reliable and worry-free. Advanced Anti-Slip Design : Featuring a horseshoe-shaped anti-slip base and deeply textured steps, this attic staircase delivers exceptional grip even in wet conditions, significantly reducing slip hazards. Rust-Resistant & Long-Lasting : Protected by a weather-resistant, rust-proof coating, this drop-down attic stair system withstands harsh environments such as moisture and prolonged sun exposure for extended durability. Reinforced guardrails and a scissor-style load-bearing structure minimize step flex, ensuring an optimal balance of safety and longevity for years of dependable performance. Space-Saving Attic Stairs : Designed for easy wall-mounted installation, this attic stair with pull-down system folds compactly to dimensions of just 27.5 x 23.6 inches, helping to maximize available floor space. Adjustable Height : These premium pull-down attic stairs feature steps measuring approximately 10.2″ in height and 14.7″ in width. The attic staircase system extends to a maximum vertical height of 10 ft. For lower ceilings, simply remove steps as needed to customize the overall extension. Easy Installation : This wall-mounted attic stair is straightforward to install. Just follow the clear steps provided in the instruction manual for a quick and hassle-free setup. YTOXEO Wall-Mounted Attic Ladder with Pull Down System Model: Wall-Mounted Attic Ladder 📋 Product Information Brand YTOXEO Model Wall-Mounted Attic Ladder Type Attic Ladder Installation Type Wall-mounted 📏 Dimensions & Measurements Item Height 118 in Expanded Vertical Height 118 in Expanded Extended Length 133.8 in Outer Frame Size 23.6 in × 27.5 in Pedal Dimensions Width: 5.3 in Thickness: 0.9 in Number of Steps 12 steps ⚖️ Capacity & Materials Load Capacity 1102 LBS Gross Weight 66 lbs Material Titanium-Magnesium Alloy Lightweight and durable construction Color Options Silver Black ✨ Key Features Primary Features • Foldable, Portable • Extendable, Foldable, Handrail • Space-saving, Easy installation • Sturdy, durable and safety • Convenient Use, High-quality, Easy Operation Special Features • Foldable design • Anti-slip safety features 🔧 Construction Details Safety & Structure Details • Reinforced S-Bend, Fixed Handrail • Steel spring, support bar, hand pull latch • Solid rivets and anti-slip widened tread 🚚 Shipping & Logistics Shipping Information Ships from California & New Jersey warehouses