(2) 20mm Thick 5x4.75 HubCentric Wheel Spacers For Chevrolet Camaro Corvette S10
$ 20.59
Description
[ Wheel Spacer Specifications] Quantity 2Pcs Thickness 20mm Center Bore Size 70.5mm Vehicle Bolt Pattern 5x4.75" or 5x120.65mm Wheel Bolt Pattern 5x4.75" or 5x120.65mm Thread Type M12x1.25 [Application] For Buick Riviera 1979-1985 For Cadillac Eldorado 1979-1985 For Cadillac XLR 2004-2009 For Chevrolet Blazer 1987-2005 For Chevrolet Camaro 1982-2002 (May not fit on front hub due to hub height issue) For Chevrolet Corvette 1984-2019 For Chevrolet S10 1982-2004 (Does not fit front hub of 2WD Models) For Chevrolet S10 Blazer 1983-1994 (Does not fit front hub of 2WD Models) For GMC Jimmy 1991-2005 For GMC S15 1982-1990 For GMC Sonoma 1991-2004 (Does not fit front hub of 2WD Models) For Pontiac Firebird 1982-2002 (May not fit on front hub due to hub height issue) [Package Included] 2pcs Wheel Spacers 1 pair Gloves 1x Steel wire ball [Important Notes] 1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide. 2. Measure the fender gap and stock bolt length to choose suitable thickness. 3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle. 4. Do not use impact wrench .Please use hand wrench. Recommended to use threadlocker. 5. Returns are only accepted if unused and not installed. (ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE) -- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle. -- For 1 inch or less or special adapters , If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs. -- For 2 inches or more or special adapters , If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small size adapters or purchase longer studs yourself. What should I pay attention to during installation? 1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 3) DO NOT proceed if both of the wheel spacer do not fit. 4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers. 5 ) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident. 7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles. 8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
We had some issues with shipping -- 1st shipment was returned but seller refunded with no problem and re-sent. I'm very happy with the final result. Seller should change in the description on eBay the shipper to USPS for these smaller packages because shipper is listed as UPS ground for this item. This is what caused the issue. However, overall, I'm very pleased.
This company is a great company to work with. I accidentally sent the wrong address but they worked it out for me and had it sent to my new address. Thankfully. The ball joints that I ordered were packed very well and came to me in good shape. They seem to be good quality. I have not used or installed them yet. Still need to purchase the proper tools to do so.
Perfect transaction! Brand new OEM A/C Compressor (67328) exactly as described. Fits my Scion xD/Toyota Matrix/Corolla 1.8L with no issues. Fast shipping, well-packaged, and excellent communication. Highly recommend this seller!
Related products
4PCS 15mm 5x120 Wheel Spacers M14X1.25 Bolts for BMW 228i 320i 528i M2 M3 M4 M5
$ 32.14PCS 1" 5x4.5 Wheel Spacers 1/2"x20 for Ford Ranger Mustang Edge Jeep Liberty
$ 35.11(4) 2" Hubcentric 5x4.5 5x114.3 Wheel Spacers For Jeep Wrangler YJ Cherokee XJ
$ 55.18(4) 12mm&20mm 5x120 Wheel Spacer HubCentric 14X1.25 For 17-18 BMW 340i GT xDrive
$ 36.62