2pc 6x127 to 6x139.7 Wheel Adapters 6061-T6 1.25 Inch 32mm for 6x135 to 6x139.7 Fitment

$ 24.79

Hub Bore: 87.1mm Number in Pack: 2 Finish: Anodized Silver Brand: RDX Racing Type: Wheel Adapter Manufacturer Part Number: DOD197-32-RDX Wheel Bolt Pattern:: 6x5.5" (6x139.7) Manufacturer: RDX Racing Wheel Bolt Pattern: 6x5.5" (6x139.7) Spacer Thickness: 32mm (1.25") Performance Part: Yes Thread Size: 14x1.5 Interchange Part Number: Allow 6x127 (Hub) to Use 6x139.7 (Wheel) Other Part Number: Allow 6x135 (Hub) to Use 6x139.7 (Wheel) Placement on Vehicle: Front Axle, Rear Axle Warranty: Twelve-Month Bolt Pattern: 6x127 & 6x135 (Hub) to 6x139.7 (Wheel) Vehicle Bolt Pattern:: 6x5" (6x127) & 6x135 Installation Note: Straight Bolt-On Material: High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs Spacer Type: Lug Centric Items Included: Wheel Adapters & Nuts

Description

Adapter Thickness: 32mm (1.25 Inch) Each Side Quantity: 2 Pieces Bolt Pattern: 6x127(6x5") & 6x135 (Hub) to 6x139.7(6x5.5'') (Wheel) Center Bore: 87.1mm Thread Pitch: 14mm X 1.5 Adapter Type: Bolt pattern conversion adapter (Lug centric) This adapter set includes open end lug nuts to secure the adapters onto your factory hubs Your Factory wheel studs may extend past the surface of the wheel adapters. In this case you will need to: 1. Adjust the factory studs to a shorter length. 2. Check that the wheels have open slots (cavities) between the fastener holes. 3. Replace the factory studs with a new set of shorter studs.