3D Printed Vestas Turbine Load w/Float On Decals Authentic Vestas Gray. 1/50th
$ 12.66
Description
3D Printed Vestas Wind Turbine Kit (Nacelle) Load w/ Float On Decals in Authentic Vestas Gray. 1/50th Scale. How to apply water slide decals: 1) Cut the decals out as close to the image as you can. 2) Dip the decals into room temperature water until the backing loosens. This may take a few seconds or a minute or more. 3) Moisten the area of the model where you will apply the decal. This allows the decal to "float" so you can position the decal. 4) Slide the decal partly off the backing and place the decal on the model face up, then slide the backing out from under it while holding the decal in position. 5) Using a brush or lint free cloth blot off the excess water and smooth the decal down to get any excess water or air bubbles underneath the decal out. 6) Allow to dry 7) Also suggest applying a clear coat after the decal has dried to help protect the decal from chips and scratches. 8) You can also use MicroSol to help "snug" the decal down over ridges and valleys. Printed in the USA by ETC Parts. Included: 1/64th Nacelle Load In Authentic Vestas Gray. All Metal Alloy Lifting Sling Chain and Clasps. Approximate Dimensions: 8 3/4" L x 4" W x 2 1/4" T. Great Flat Bed or Goose Neck Trailer Load Manufacturing Process; 1) Print with our In-House High End 3D Printer. 2) Inspect and remove any burrs or imperfections. 3) 1st Coat Primer Paint. 4) 2nd coat Authentic company/manufacturers colors. If Applicable.
