3D Printer Parts Flexible Build Plate Kit Replacement
$ 16.01
Description
🌞Compatible Models:Compatible for Flashforge Adventurer 3 3D Printer.Many replacement parts look similar but different, Check your model before you order. If you have any problem with models please feel free to contact us. 🌞Attention Before Use: Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation. 🌞Good Performance: Simply stick the adhesive bottom plate onto the heat bed platform without edge warp, and no glue is needed, convenient to use. 🌞Easy installation: Build surface comes with upper magnetic build surface and lower magnetic adhesive base, easy to use. 🌞Guarantee: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails as soon. Product Description Flexible and Removable:Flexible Flexible, removable, can stick to magnetics very well. High strength and heat resistance Easy to Adhere and Remove Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right offrepeatedly,resistance, durable Just wipe down with isopropyl between prints for best results ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry Product description 1. No glue, just tear off the protective film and print directly. 2. Easy to clean up, wipe it off with wet tissue or before printing. 3. Print does not warp edges, and has strong stickiness. 4. Use high-quality stainless spring steel with good flatness. 5. The printed model can be removed without the aid of other tools, and it can be bent back to a flat state without damaging the model. 6, high temperature resistance and no deformation, attracting magnets. 7. Designed with boss, easy to install, easy to dismantle. 3D Printing Build Surface sticker for Flashforge Adventurer III 3D printer Flexible Removable Build Plate This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily. Excellent Performance: This magnetic bed has strong This magnetic bed has strong flexibility and heat resistance up to 70 ℃ without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints.
