4PCS 1
4PCS 1
4PCS 1
4PCS 1
4PCS 1
4PCS 1
4PCS 1
4PCS 1
4PCS 1
4PCS 1

4PCS 1" 5x4.5 5x114.3 Wheel Spacers For Ford Ranger Mustang Edge Jeep Wrangler

$ 34.95

UPC: 788601131834 gtin13: 788601131834 Brand: TEMBOR

Description

[Important Notes] 1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide. 2. Measure the fender gap and stock bolt length to choose suitable thickness. 3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle. 4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker. 5. Returns are only accepted if unused and not installed.(Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE) -- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle. Specifications( Please Make Sure You Take The Proper Measurements Before Purchasing ) Thickness: 1 inch (25.4mm) per spacer Color: Black Hub Bore Size: 82.5mm Vehicle Bolt Pattern: 5x4.5 / 5x114.3mm Wheel Bolt Pattern: 5x4.5 / 5x114.3mm Thread Pitch: 1/2"x 20 Compatibility( The compatibility information is just for reference ) Year Make Model For 1986-1997 Ford Aerostar For 1992-2011 Ford Crown Victoria For 2007-2014 Ford Edge For 1991-2018 Ford Explorer For 2009-2018 Ford Flex For 2005-2007 Ford Freestyle For 1965-1967 Ford Galaxie For 1994-2014 Ford Mustang For 1983-2011 Ford Ranger For 1984-2001 Jeep Cherokee For 1986-1992 Jeep Comanche For 1993-1998 Jeep Grand Cherokee For 2006-2012 Jeep Liberty For 1987-1995 Jeep Wrangler For 1997-2006 Jeep Wrangler For 2007-2015 Lincoln MKX For 1991-2011 Lincoln Town Car For 1992-2011 Mercury Grand Marquis For 1999-2010 Mercury Mountaineer Package Included 4pcs Wheel Spacers 1 pair Gloves 1x Steel wire ball [Important Notes] 1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide. 2. Measure the fender gap and stock bolt length to choose suitable thickness. 3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle. 4. Do not use impact wrench .Please use hand wrench. Recommended to use threadlocker. 5. Returns are only accepted if unused and not installed. (Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE) -- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle. -- For 1 inch or less or special adapters , If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs. -- For 2 inches or more or special adapters , If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small size adapters or purchase longer studs yourself. What should I pay attention to during installation? 1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 3) DO NOT proceed if both of the wheel spacer do not fit. 4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers. 5 ) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident. 7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles. 8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.

  1. We had some issues with shipping -- 1st shipment was returned but seller refunded with no problem and re-sent. I'm very happy with the final result. Seller should change in the description on eBay the shipper to USPS for these smaller packages because shipper is listed as UPS ground for this item. This is what caused the issue. However, overall, I'm very pleased.

    just TDUBB it

  2. This company is a great company to work with. I accidentally sent the wrong address but they worked it out for me and had it sent to my new address. Thankfully. The ball joints that I ordered were packed very well and came to me in good shape. They seem to be good quality. I have not used or installed them yet. Still need to purchase the proper tools to do so.

    Bjorn5ff5261

  3. Perfect transaction! Brand new OEM A/C Compressor (67328) exactly as described. Fits my Scion xD/Toyota Matrix/Corolla 1.8L with no issues. Fast shipping, well-packaged, and excellent communication. Highly recommend this seller!

    Peter Tickle

Related products