Car Audio Speaker Wire to RCA Line Output Converter, 2-Channel High to Low RCA C
$ 17.28
Description
Car audio speaker level converter wiring adapter allows to add 2 channel or mono amplifier or subwoofer to existing factory or aftermarket car stereo kit. Convert car stereo speaker wire output to RCA Cable outputs. In order to improve the sound quality, the function of RCA output can convert high to low. The high voltage signal output of the amplifier/speaker converts to low-voltage signal. Convenient to use. There is the level gain adjustment to adjust the bass down without having to pull over and manually adjust the amplifier. Easy to install. Use this adapter when adding an amplifier to a factory radio that convert the radio's speaker level output to the lower amplifier (RCA) level input. Tap into a speaker wire and it senses the signal, and turns on a relay to send power to the amp. Reasonable and neat power plug, it has the prefect bonding and contact stability. Provide clean and excellent sound. Product Description 2-Channel High to Low RCA Converter for Adding Amplifier Subwoofer to Stock Stereo Car audio speaker level converter wiring adapter allows to add 2 channel or mono amplifier or subwoofer to existing factory or aftermarket car stereo kit. High voltage signal output of the amplifier/speaker converts low-voltage signal. Convert car stereo speaker outputs to RCA outputs. Allows adding 2 channel amplifiers to most stereos systems without RCA outputs. Allows adding amplifiers and subwoofers to existing factory systems Good Conductivity High quality copper wire has good electrical conductivity Add to Subwoofer System Works with high power car stereos, up to 50 watts per channel, to add subwoofer to any car stereo Easy Installation Just connect the wire between the speaker and amplifier as the instructions. RAC Output Conversion Converts car speaker wire outputs to RCA Cable outputs and provides 12V remote output. Installation Steps 1) Connect the left (+) speaker wire of your stereo to the white wire; Connect the left (-) speaker wire to the white/black wire. Connect the right (+) speaker wire to the gray wire; Connect the right (-) speaker wire to the gray/black wire. 2) Connect the blue wire to the amplifier’s “remote turn-on” or “REM” INPUT. 3)Connect the RCA audio outputs of the item to the amplifier’s inputs. Why is the High to Low Converter still working after the car is turned off? 12V power needs to be connected to ACC, if connected to the car battery will always working. what is the max input watts? The max input watts is 50 watt. What is the blue wire for? Connect the blue wire to the amplifier’s “remote turn-on” or “REM” INPUT. Always refer to your amplifier’s owner’s manual for wiring details/function of your particular amplifier.
