Dixon Quick Coupling Pneumatic Fitting: 4FM4. Quantity 5

Description

4FM4 by Dixon Valve | Pneumatic Quick Disconnect Coupling | F-Series / J-Series | 1/2" Male NPTF x 1/2" Manual Industrial Interchange | Socket | Nitrile Seal | Steel Specifications for Variant SKU: 4FM4 Dixon Series: F-Series Shape (Orientation): Straight Ends Configuration: 1/2in Female ISO-6150 Series B Industrial Pneumatic QD Interchange, 1/2in Male NPTF Material(s): Steel Seal Material(s): Buna-N/Nitrile Rubber Compatibility & Interchange: Foster 3, 4, 5 and 6 Series Parker 20-Series Manual Interchange Hansen 1000, 400 and 500 Construction: Machined components are manufactured using solid bar stock. Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. Nitrile (Nitrile Rubber) seals are standard. Steel componentry is plated using ROHS Compliant Trivalent Chrome. Steel sleeve and steel tubular valve. Safety Notes: It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure. HOW IT WORKS To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free. Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand. After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted. After the line is fully exhausted, you are able to safely separate the nipple from the coupler.