Dixon V16f16-b Hydraulic Quick Connect Disconnect Brass

Description

Additional Description Features General purpose hydraulic quick-connect provides superior flow characteristics with built-in reliability Construction Machined components are manufactured using solid bar stock Available Options Contact Dixon for all available option adders Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone Kalrez seal options include: 4079, 6375 and 7075 Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged Oxy-clean treatment is available Compatibility & Interchange Data Interchangeable to MIL-C-51234 Snap-Tite H and Faster TNV Note Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation. Safety notes WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. Specifications Part NumberV16F16-B MaterialBrassThreadFemale NPTF Thread Size2"- 11-1/2 Maximum OD3.83" (97.3mm) Body Size2"Hex3-1/2"Length3.72" (94.5mm) Maximum Operating Pressure400 PSI (28 bar) Burst Pressure1000 PSI (70 bar) Temperature Range-40°F to +250°F (-40°C to +121°C)Optional Pkg/Box Qty1 Weight Lb5.3300