Fit Chevy Suburban Tahoe 2007-2014 - 6x LED Headlight+Fog Light Bulbs Combo Kit
$ 20.59
Description
Pls contact us first before you want to return it,thank you! Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model. Specifications: --Plug Type: 9005 + H11+H16,Hi/Lo Beam Fog Light --LED Quantity(each bulb): 2pcs --Luminous Flux: 12000lm/set(6000lm/bulb) --Operating Voltage: DC 9-32V(fit 12V,24V vehicles) --Color Temperature: 6000K Pure White --IP67 rated water and dust seal,over 50000hrs lifetime --Material: Aviation 6063 aluminum profile --Operating Temperature: -40-80 degree Celsius --Usage: Headlight Feature: --(6pcs/set)9005+H11+5202 Hi-Lo Beam LED headlight Fog Light conversion kit --Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light --Xenon white light reflect road paint/signs better to show clearer road situation during night driving --270 degree low beam angle with cut-off line,will not dazzle oncoming traffic --All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature --Built-in constant current CPU, instant full brightness without start-up relay --It can directly replace the traditional tungsten bulb of the original car; --The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers --There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds. --LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel! --It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions --LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A. Two-way heat dissipation channel: 1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating 2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate Note: --No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns! --When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage. The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall; Package Included: 2 x 9005 LED Headlight High Beam Bulbs 2 x H11 LED Headlight Low Beam Bulbs 2 x 5202/H16 LED Fog Light bulbs New and old packaging will be shipped randomly Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Be sure to turn off the ignition and remove the key. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
