Flux Generator Gas Brazing Tank RD160T-CA Flux Generation Stainless Steel Tank
$ 258.04
Description
Product Description ● The parent body is made of high-quality stainless steel to enhance the corrosion resistance of the generator and prevent rust on the inner wall. ● The inlet and outlet valves are made of high-quality copper stop valves, which extend the service life and reduce leakage. ● The air outlet of the equipment is equipped with a high-quality one-way check valve, and the container is equipped with a safety explosion-proof disc to ensure higher safety; ● The equipment is equipped with air flow regulating valve, which can adjust the concentration of flux, and the effect of welding products is better; ● It is equipped with stainless steel liquid storage tank, which does not need to shut down when feeding. Open the valve to add directly, improving efficiency, reducing the number of times the flux is directly exposed to the air for feeding, preventing the flux from absorbing water in the air and volatilizing the main components, improving product quality and reducing waste. ● The normal pressure operation range is between 0.05-0.08MPa for gas pressure and 0.5-0.8MPa for oxygen pressure; ● The equipment is equipped with a regulating valve, which can adjust the gas flow at will and facilitate operation. ● Before the gas flux enters the tank, please close the regulating valve tightly, and then reopen the valve after atomization for a certain time to regulate the gas flow. technical parameter Model: RD160T-CA (stainless steel tank with regulating valve) Applicable gases: acetylene, propane, liquefied petroleum gas, etc Applicable welding equipment: automatic and manual brazing Maximum atmospheric flow: 3m3/h Effective volume: 4L for upper tank and 1.5L-2L for lower tank Inlet pressure: 0.06MPa Outlet pressure: 0.05MPa Air inlet port: 5/16 hose socket or M16X1.5 Air outlet port: 5/16 hose socket or M16X1.5 (Z)
