For Ford F-150 F250 F350 Mustang 2004 6000K 9007 LED Headlight + 9145 Fog Bulbs

Description

Home Payment Shipping About us Contact us Details Note: No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns! When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage. The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall; Features: 1. It can directly replace the traditional tungsten bulb of the original car; 2. The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers 3. There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds. 4. LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel! 5. It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions 6. LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A. Specification： Plug Type: 9007 HB5, Dual Beam Power(per set): 80W/Set, 40W/bulb Luminous Flux: 8000lm/set (4000lm/bulb) Operating Voltage: DC 9-32V(fit 12V, 24V vehicles) Color Temperature: Pure White 6000K - 6500K IP68 rated water and dust seal, over 20000hrs lifetime Beam Angle: 270 degree@low beam, 360 degree@high beam Material: Aviation 6063 aluminum profile Operating Temperature: -40-80 degree Celsius Usage: headlight, fog light (4pcs/set) COB Hi-Lo Beam LED Headlight Fog Light Conversion Kit Latest COB chip light source, 2 luminous faces(270/360 degree) no blind zone Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light Xenon white light reflect road paint/signs better to show clearer road situation during night driving 270 degree low beam angle with cut-off line, will not dazzle oncoming traffic All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature Built-in constant current CPU, instant full brightness without start-up relay LED headlight advantages: ****LED lamps are more energy and power than conventional halogen lamps. ****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety. ****Instantly start without strong current impact, improve battery life by more than 30%. ****Fast cooling, using the most advanced, heat-dissipating structural design. ****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%. ****Low heating temperature, The working temperature of helium can reach 800°-1000° ****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate! Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Be sure to turn off the ignition and remove the key. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. Package Included: 2x 9007 LED Headlight Bulbs 2x 9145 LED Fog Light Bulbs New and old packaging will be shipped randomly！！ Shipping Policy Payment Method Returns Policy Shipping Policy Payment Method Returns Policy Home Payment Shipping About us Contact us Store Categories Store Categories For Chevrolet For Ford For GMC For Ram For Dodge For Kia For Nissan For Sabaru For Acura For Buick For Cadillac For Honda For Jeep For Mazda For Mitsubishi For Toyota For Volkswagen For Volvo For Lexus Other Details Note: No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns! When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage. The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall; Features: 1. It can directly replace the traditional tungsten bulb of the original car; 2. The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers 3. There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds. 4. LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel! 5. It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions 6. LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A. Specification： Plug Type: 9007 HB5, Dual Beam Power(per set): 80W/Set, 40W/bulb Luminous Flux: 8000lm/set (4000lm/bulb) Operating Voltage: DC 9-32V(fit 12V, 24V vehicles) Color Temperature: Pure White 6000K - 6500K IP68 rated water and dust seal, over 20000hrs lifetime Beam Angle: 270 degree@low beam, 360 degree@high beam Material: Aviation 6063 aluminum profile Operating Temperature: -40-80 degree Celsius Usage: headlight, fog light (4pcs/set) COB Hi-Lo Beam LED Headlight Fog Light Conversion Kit Latest COB chip light source, 2 luminous faces(270/360 degree) no blind zone Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light Xenon white light reflect road paint/signs better to show clearer road situation during night driving 270 degree low beam angle with cut-off line, will not dazzle oncoming traffic All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature Built-in constant current CPU, instant full brightness without start-up relay LED headlight advantages: ****LED lamps are more energy and power than conventional halogen lamps. ****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety. ****Instantly start without strong current impact, improve battery life by more than 30%. ****Fast cooling, using the most advanced, heat-dissipating structural design. ****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%. ****Low heating temperature, The working temperature of helium can reach 800°-1000° ****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate! Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Be sure to turn off the ignition and remove the key. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. Package Included: 2x 9007 LED Headlight Bulbs 2x 9145 LED Fog Light Bulbs New and old packaging will be shipped randomly！！ Shipping Policy Payment Method Returns Policy Customer service Shipping Policy NOTE: We will ship item locally for US buyers. Usually for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you. For US customers, all items will be shipped out within 1-2 business day with cleared payment. Please included your phone number to the payment note for prompt and secure shipment. Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order. Payment Method 1. You can use a variety of payment methods such as credit, debit, and gift cards, Apple Pay, Google Pay, PayPal, and PayPal Credit. 2. Items will be shipped to your eBay address. Please make sure it is correct. Returns Policy (1). We offer 60 days return policy. Please contact us within 60 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package. (2). All returned items should be in the original packaging , return tracking information should be provided .. (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself . Customer service Our AUIMSOCO Tech's are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours. (1).If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem! We always put our customers first and your satisfaction is guaranteed. (2).We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.