Novagard Novaflex Metal Roof & Panel Caulk Adhesive Sealant
$ 10.03
Description
A single-component, low-odor silicone used to seal seams and fill joints. NovaFlex Metal Roof & Panel Adhesive Sealant cures to most materials without corroding, drying to a durable, rubber-like solid that is utterly impervious to UV light, so will never chalk or fade. This general purpose compound provides unbeatable adhesion to metal, coated metals, wood, masonry, PVC, and most common construction materials. - Great for exterior and interior sealing - Permanently flexible - Will not shrink or crack - Waterproof - Tack-free in 10 minutes, completely cured within 48 hours - No solvents or odor - Will not freeze - Easily gunned at all temperatures Product Specifications APPEARANCE VISCOSITY EXTRUSION RATE 1/8” ORIFICE @ 50 PSI SKIN OVER TIME 3/8” @ 50% RH & 77°F THROUGH CURE 3/8” @ 50% RH & 77°F Paste (Various Colors) 3,500 – 7,000 poises (Brookfield #7 @ 10 rpm) (Type I – Class 35) 4,500 – 8,000 poises (Brookfield #7 @ 10 rpm) (Type II – Class 50) 30 – 80 grams/minute 5 – 10 minutes 48 hours (14 days for OEM window applications) Typical Properties SLUMP (FLOW) SPECIFIC GRAVITY TENSILE STRENGTH ASTM D412 ELONGATION ASTM D412 TEAR RESISTANCE ASTM D624 SHORE HARDNESS ASTM D2240 SERVICE TEMPERATURE APPLICATION TEMPERATURE ADHESION ASTM D903 PEEL STRENGTH STM C974 GREEN STRENGTH ASTM C1135 JOINT SEALANT DESIGNATION ASTM C920 No Slump 1.00 – 1.05 (Type I – Class 35) 1.15 – 1.25 (Type II – Class 50) 140 – 200 psi (Type I – Class 35) 170 – 220 psi (Type II – Class 50) 500 – 650% (Type I – Class 35) 800 – 1,000% (Type II – Class 50) 30 – 35 pli 20 +/- 5 (Type I – Class 35) 25 +/- 5 (Type II – Class 50 -40°F to 400°F (-40°C to 204°C) -20°F to 160°F (-29°C to 71°C) Glass: 12 – 15 pli Aluminum: 10 – 14 pli Vinyl: 12 – 15 pli -- -- Type S, Grade NS, Class 35/50, Use NT, M, G, A, and O Prefer to purchase by the case instead? Check out our case listing here. https://www.ebay.com/itm/355133096861
