STM32F103C8T6 CH32F103C8T6 ARM STM32 Minimum System Development Board ST-Link V2

Description

Store Categories Store Categories Other STM32F103C8T6 CH32F103C8T6 ARM STM32 Minimum System Development Board ST-Link V2 Details STM32F103C8T6 Product Feature: 1.100% brand new high-quality products. 2. Made of high-quality materials, durable and practical. 3. Small size, simple application, and easy installation. 4. Efficient and stable performance, high precision, and long working life. 5. Widely applicable. Product parameters: Microcontroller: 32-bit microcontroller based on ARM Cortex-M3 core CPU Core: ARM Cortex-M3 32-bit RISC Core Maximum operating frequency: 72MHz Program memory capacity: 64KB RAM capacity: 20KB Working voltage: 2V~3.6V Working temperature range: -40 ° C~85 ° C Size: 22.86mm x 53.34mm Package List: Power module * 1 Pin arrangement * 2 CH32F103C8T6 Product Features 1. Adopting the popular Type-C USB interface for easy use; 2. On the basis of the original old version, the boot jumper has been removed and the buttons can be used directly, making it more convenient. 3. The USB end of the chip is led out using Type-C, and the simulation download end is also led out using Type-C; 4. DAPLink is integrated, which can be downloaded and simulated directly, greatly facilitating use. DAPLink supports USB HID mode, which can be used directly without a driver (WIN10). In addition, the virtual serial port can be directly connected to the PA9 and PA10 of the microcontroller, and can be directly connected to the upper computer software of the serial port to check the serial port output. 5. Highly integrated, all components are on one PCB surface; 2. Instructions for use (1) If the USB function of the chip is not used, then simply connect the USB port on the USB Dug end. (2) Open programs such as Keil Project Select CMSIS-DAP Debgger from the Dubeg attribute card in the options option Package List Core board * 1 Pin arrangement * 2 STM32F401RCT6 Product Features: With 2 high brightness LEDs, red power light, blue for user test light 25MHZ high speed crystal & 32.768Khz 6PF low speed crystal Using lead-free process, send 2 rows of row of pins and SWD download 4PIN bent pin, more convenient and environmental protection 16-pin TYPE-C high quality interface, durable and reliable With 3 buttons, reset button, BOOT0 button, user button. Parameter description; 25MHZ high speed crystal & 32.768Khz 6PF low speed crystal Use lead-free process, send 2 rows of row pins and SWD download 4PIN bend pins, more convenient and environmental protection There are 2 high brightness LED lights, red power light, blue for user test light There are 3 buttons, reset button, BOOT0 key, user button 16-pin TYPE-C high quality interface, durable and reliable Have reserved Flash pads, provide USBDisk&&FATFFS routines Factory has burned respiratory program, provide source program and hex burn-in program for your learning convenience. Support MicroPython programming, provide available MicroPython firmware, see link for configuration file, but no technical answer! How to enter the ISP mode download: ISP mode download Method 1: In the power-on state, press and hold the BOOT0 key and the reset key, then release the reset key and release the BOOT0 key after 0.5 seconds Method 2: In the power-down state, press and hold the BOOT0 key, then release BOOT0 after 0.5S of power-up USB cable connects to MCU's TYPE-C interface, serial port connects to PA9, PA10, download software recommends STM32CubeProg, WeAct Studio Download Tool Serial port download USB to serial port (ex.: CH340) TX - PA10 ,RX - PA9, and do not connect the MCU Type-C to the computer, you must use external power supply, otherwise it will affect the MCU download Use STM32CubeProgammer for serial download USB download (DFU download) STM32CubeProgrammer check the USB mode, WeAct Studio Download Tool double-click WeAct Studio USB Download Tool.bat, then follow the prompts MCU enters ISP mode, use USB cable to connect to PC Select the firmware, the rest of the operation is the same as the serial port download Steps to use the software. Connect the core board to the computer with the data cable, the WeAct HID device will appear Press and hold the KEY key, re-power or reset into Bootloader Select the firmware, click to complete the download The selected firmware will be updated with the KEIL recompile, no need to reselect To enter the bootloader method: Press and hold , re-power or reset, C13 LED blinks to release APP into the bootloader reference stm32f401_test_APP 0x8004000.zip project In the burn-in bootloader Click/double click for C13 LED to turn on/off SW debug port is open, you can use debugger to burn, no need to enter DFU mode How to exit the bootloader Reset the MCU, reset the key/uploader click , C13 LED blinks to release Caution: The first time you burn the bootloader, the MCU will not run down, while the C13 LED 200MS blinks, just reset the MCU again. Bootloader and APP burning software source code are not open Product List: 1X development board 2X single row of pins 1X curved pins STM32F411CEU6 Product description: This is a STM32F411CEU6 core development board, the core core is ARM Cortex®-M4. It is rich in resources, backed by powerful resources provided by STMicroelectronics. It is a good choice whether to use it for learning or for secondary development. Module parameters: IC model: STM32F411CEU6 IC storage: 512 Kbytes flash, 128 Kbytes SRAM External crystal oscillator: 25MHz high-speed crystal +32.768KHz low-speed crystal Back flash pad: Users can solder and install flash by themselves as needed (W25Q32JVSSIQ is recommended) Ready-made communication interfaces: Type-C USB, SWD, USART (A9:TX A10:RX). Package Included: 1*STM32F411CEU6 development board ST-Link V2 Product Feature: 1.100% brand new high-quality products. 2. Made of high-quality materials, durable and practical. 3. Small size and simple application. 4. Efficient and stable performance, long working life. 5. Widely applicable. Supported software Directly support ST official IDE (integrated development environment software) ST Visual Development (STVD) 4.3 or above Burning software ST Visual Program (STVP) 4.3 or above . Support ATOLLIC, IAR for STM8s 1.3 or above Compared to Keil for arm MDK4.6 or above, TASKING and other STM32 integrated development environments. STM32CubeProgrammer Vxx. Supported devices Supports all STM8 series microcontrollers with SWIM interface Supports all STM32 series microcontrollers with SWD interface Package List: Burner * 1 ( color randomly) Wiring * 4 1 Set STM32F103C8T6 Package list: 1* STM32F103C8T6 1*ST-Link V2 Shipping Policy Payment Method Returns Policy Shipping Policy Payment Method This is the description of Payment Method. Do not dismiss your dream. To be without dream is to be without hope. To be without hope is to be without purpose. Do not run through your life so fast that you forget not only where you have been, but also where you are going. Life is not race, but a journey to be savored each step of the way. Returns Policy This is the description of Returns Policy. Do not dismiss your dream. To be without dream is to be without hope. To be without hope is to be without purpose. Do not run through your life so fast that you forget not only where you have been, but also where you are going. Life is not race, but a journey to be savored each step of the way. Copyright©2017 DataCaciques Home Payment Return Policy About us Contact us STM32F103C8T6 CH32F103C8T6 ARM STM32 Minimum System Development Board ST-Link V2 Details STM32F103C8T6 Product Feature: 1.100% brand new high-quality products. 2. Made of high-quality materials, durable and practical. 3. Small size, simple application, and easy installation. 4. Efficient and stable performance, high precision, and long working life. 5. Widely applicable. Product parameters: Microcontroller: 32-bit microcontroller based on ARM Cortex-M3 core CPU Core: ARM Cortex-M3 32-bit RISC Core Maximum operating frequency: 72MHz Program memory capacity: 64KB RAM capacity: 20KB Working voltage: 2V~3.6V Working temperature range: -40 ° C~85 ° C Size: 22.86mm x 53.34mm Package List: Power module * 1 Pin arrangement * 2 CH32F103C8T6 Product Features 1. Adopting the popular Type-C USB interface for easy use; 2. On the basis of the original old version, the boot jumper has been removed and the buttons can be used directly, making it more convenient. 3. The USB end of the chip is led out using Type-C, and the simulation download end is also led out using Type-C; 4. DAPLink is integrated, which can be downloaded and simulated directly, greatly facilitating use. DAPLink supports USB HID mode, which can be used directly without a driver (WIN10). In addition, the virtual serial port can be directly connected to the PA9 and PA10 of the microcontroller, and can be directly connected to the upper computer software of the serial port to check the serial port output. 5. Highly integrated, all components are on one PCB surface; 2. Instructions for use (1) If the USB function of the chip is not used, then simply connect the USB port on the USB Dug end. (2) Open programs such as Keil Project Select CMSIS-DAP Debgger from the Dubeg attribute card in the options option Package List Core board * 1 Pin arrangement * 2 STM32F401RCT6 Product Features: With 2 high brightness LEDs, red power light, blue for user test light 25MHZ high speed crystal & 32.768Khz 6PF low speed crystal Using lead-free process, send 2 rows of row of pins and SWD download 4PIN bent pin, more convenient and environmental protection 16-pin TYPE-C high quality interface, durable and reliable With 3 buttons, reset button, BOOT0 button, user button. Parameter description; 25MHZ high speed crystal & 32.768Khz 6PF low speed crystal Use lead-free process, send 2 rows of row pins and SWD download 4PIN bend pins, more convenient and environmental protection There are 2 high brightness LED lights, red power light, blue for user test light There are 3 buttons, reset button, BOOT0 key, user button 16-pin TYPE-C high quality interface, durable and reliable Have reserved Flash pads, provide USBDisk&&FATFFS routines Factory has burned respiratory program, provide source program and hex burn-in program for your learning convenience. Support MicroPython programming, provide available MicroPython firmware, see link for configuration file, but no technical answer! How to enter the ISP mode download: ISP mode download Method 1: In the power-on state, press and hold the BOOT0 key and the reset key, then release the reset key and release the BOOT0 key after 0.5 seconds Method 2: In the power-down state, press and hold the BOOT0 key, then release BOOT0 after 0.5S of power-up USB cable connects to MCU's TYPE-C interface, serial port connects to PA9, PA10, download software recommends STM32CubeProg, WeAct Studio Download Tool Serial port download USB to serial port (ex.: CH340) TX - PA10 ,RX - PA9, and do not connect the MCU Type-C to the computer, you must use external power supply, otherwise it will affect the MCU download Use STM32CubeProgammer for serial download USB download (DFU download) STM32CubeProgrammer check the USB mode, WeAct Studio Download Tool double-click WeAct Studio USB Download Tool.bat, then follow the prompts MCU enters ISP mode, use USB cable to connect to PC Select the firmware, the rest of the operation is the same as the serial port download Steps to use the software. Connect the core board to the computer with the data cable, the WeAct HID device will appear Press and hold the KEY key, re-power or reset into Bootloader Select the firmware, click to complete the download The selected firmware will be updated with the KEIL recompile, no need to reselect To enter the bootloader method: Press and hold , re-power or reset, C13 LED blinks to release APP into the bootloader reference stm32f401_test_APP 0x8004000.zip project In the burn-in bootloader Click/double click for C13 LED to turn on/off SW debug port is open, you can use debugger to burn, no need to enter DFU mode How to exit the bootloader Reset the MCU, reset the key/uploader click , C13 LED blinks to release Caution: The first time you burn the bootloader, the MCU will not run down, while the C13 LED 200MS blinks, just reset the MCU again. Bootloader and APP burning software source code are not open Product List: 1X development board 2X single row of pins 1X curved pins STM32F411CEU6 Product description: This is a STM32F411CEU6 core development board, the core core is ARM Cortex®-M4. It is rich in resources, backed by powerful resources provided by STMicroelectronics. It is a good choice whether to use it for learning or for secondary development. Module parameters: IC model: STM32F411CEU6 IC storage: 512 Kbytes flash, 128 Kbytes SRAM External crystal oscillator: 25MHz high-speed crystal +32.768KHz low-speed crystal Back flash pad: Users can solder and install flash by themselves as needed (W25Q32JVSSIQ is recommended) Ready-made communication interfaces: Type-C USB, SWD, USART (A9:TX A10:RX). Package Included: 1*STM32F411CEU6 development board ST-Link V2 Product Feature: 1.100% brand new high-quality products. 2. Made of high-quality materials, durable and practical. 3. Small size and simple application. 4. Efficient and stable performance, long working life. 5. Widely applicable. Supported software Directly support ST official IDE (integrated development environment software) ST Visual Development (STVD) 4.3 or above Burning software ST Visual Program (STVP) 4.3 or above . Support ATOLLIC, IAR for STM8s 1.3 or above Compared to Keil for arm MDK4.6 or above, TASKING and other STM32 integrated development environments. STM32CubeProgrammer Vxx. Supported devices Supports all STM8 series microcontrollers with SWIM interface Supports all STM32 series microcontrollers with SWD interface Package List: Burner * 1 ( color randomly) Wiring * 4 1 Set STM32F103C8T6 Package list: 1* STM32F103C8T6 1*ST-Link V2 Shipping Policy Payment Method Returns Policy Shipping Policy 1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand. 2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders. 3.All package need to wait 30 days , Please take care it.Less than 30 days,we can't take a refund . Payment Method 1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase. 2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country. Returns Policy 1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase. 2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse. 3. Please include your eBay ID and item number with any email requests.