Suspension Stabilizer Bar Bushing-Base Rear fits 95-96 Chevrolet Corvette
$ 16.85
Description
Prothane 7-1144-BL Rear Sway Bar & End Link Bushing Kit For 84-96 Chevy Corvette Part # 7-1144-BL Prothane Fitment 1984-1996 Chevrolet Corvette One Set Will Cover the Left and Right Side Fits an 24mm (15/16 Inch) Sway Bar Only Prothane Kit Contents 2 of Sway Bar Brackets - 10062 2 of Rear Sway Bar Bushings - 60209 (24mm) 4 of End Link Bushings - 63024 4 of Metal Sleeves - 60700 (9/16 X .083 X .800 inches) 1 of Super Grease - 19-1750-001 A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long-lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar. A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane. The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking.
