T10 H4 6000k High/Low Beam LED Headlight Kit for Toyota HILUX SR5 SR

$ 16.75

Type: Light Bulb Voltage: 12 V Manufacturer Part Number: SKN - H4 T10 Bulb Life Hours: Up to 50,000 Hours Reference OE/OEM Number: DOES NOT APPLY Brand: SHENKENUO Wattage: 56 W Country/Region of Manufacture: China Suitable For: Headlight Features: Road Legal Lumens: 6000 lm Light Colour: Cold White Manufacturer Warranty: 1 Year Number of Bulbs: 4 Colour Temperature: 6000K Lighting Technology: LED

Description

NOTE: 1.Some of the vehicles need add bulb adapter (Not inclued) to get the LED bulbs replace the halogen bulbs. 2.For some vehicles, it may require install decoder or load resistor to avoid error message, turn signal hyper flash or fast blinking. Pecification: Manufacturer Part Number:K9 LED headlight Wattage: 56W/Pair,28W/Bulb Hight luminous efficacy Flux:6000LM/Pair 3000LM/Bulb Waterproof: IP68 Voltage:9V to 36V,Wide-range voltage,constant urrent control,anti-interference circuit design Long range:200m light range Color temperature:6000K Description: 1. High brightness: The latest COB with 6000K cold white LED chip; 200% brighter than the existing halogen headlights. 2. Strong heat dissipation: equipped with highly silent heat dissipation fan, speed up to 12000/min, heat dissipation efficiency, can avoid temperature accumulation on the beads, prolong the service life of the beads. 3. Simple Installation: Installation only takes 10 minutes. There is no relay. There is no capacitor. No additional wiring. Plug and play. 4. IP68 waterproof: using integrated radiator and aluminium body self-cooling, waterproof and heat-proof. Even in extreme cases, the enclosure of the rainproof driver can work properly. Automatic short circuit protection. 5. Luminous on all sides: 360 ° no dead angle. Package Included: 2x H7 Led Headlight Bulbs 2x W5W/501/T10 LED Bulbs LED headlight advantages: 1)LED lamps are more energy and power than conventional halogen lamps. 2)The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety. 3)Instantly start without strong current impact, improve battery life by more than 30%. 4)Fast cooling , using the most advanced, heat-dissipating structural design. 5)The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%. 6)Low heating temperature, The working temperature of helium can reach 800°-1000° Note: If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not. Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Make sure to have the ignition turned off and the keys removed. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. On 02/12/2024 at 13:48:59 AEDT, seller added the following information: