Description
Description The neck-through and body wings are made of alder, and the pickups are equipped with a triple phase switch that also turns the pickups on and off, a pickup that uses a bar magnet, and a hardtail bridge. *After receiving the guitar, we cleaned it, replaced the strings, adjusted the rod, adjusted the octave, adjusted the string height, and adjusted the frets. The neck was slightly wavy, so we adjusted the frets, but it will need to be replaced the next time we repair it. Please note that if you insert a wrench or other rod too far into the slot of the truss rod, it will interfere with the internal wall and will no longer turn. It is a little prone to cracking, but the sound output from the amplifier is within the acceptable range. There are some cracks in the fingerboard and some repair marks that look like they were made with glue, and we have reinforced it by applying glue again to the extent possible. *The neck is not covered by the warranty. There are many dents with dents in the paint on the end and corners of the body. There are also other signs of use such as small scratches and small dents. Product rank: B+ (good condition) Year of manufacture: 1970s Truss rod: Room to spare Frets: Less than 50% Accessories: Soft case/non-genuine Country of manufacture: Japan Weight: 3.70kg Serial number: 001468 Truss rod|[Notes] Rod has been checked up to 60° left and right and there are no problems (some wavy) Frets remaining|[Defective] Replacement should be considered at next repair String height (bass string side)|2.0mm above 12th fret String height (treble string side)|1.5mm above 12th fret Nut width|41.7mm Neck thickness (near 1st fret)|20.9mm Neck thickness (near 12th fret)|24.7mm Scale|648mm (25.5") RADIUS|184mm (7.25") Strings at setup|ERNIE BALL 2223 / .009-.042 set Repairs and maintenance | Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, grinding, nut adjustment *Truss rod, remaining frets, string height, etc. are the settings at the time of setup and adjustment at our repair center. Shipping Shipping by Fedex or EMS (international express mail service, with Tracking and Insurance, handling cost). Fedex takes 1 week, EMS takes 1-2 weeks. We will ship your item within 5 business days with carefully packed. Returns Money back guarantee within 30 days. We offer 30 days money back guarantee for defective products. The buyer must pay for returning it back to us. When there were defects in a item, please contact us. About Us If you have any problem, please contact us. Your satisfaction is important to us. We have results that I sold of tens of thousands of by Internet sale. We have pride ourselves in the Quality of items we offer. All our items has been checked by technician. As every seller dealing with pre-owned branded items in Japan we have as well license from local government to offer services of this kind. We are officially registered as legal business and we have to comply with all rules and regulations including tax requirements from the Japanese government. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.