4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5
4PC 1.5

4PC 1.5" 8x6.5 8x165.1 Wheel Spacers For 1989-2013 Chevy Silverado SUBURBAN 2500

$ 70.12

gtin13: Does not apply UPC: Does not apply Brand: TEMBOR

Description

Specifications: Thickness: 1.5" / 1.5 Inch / 38.1mm Vehicle Bolt Pattern: 8x6.5" / 8x165.1 Wheel Bolt Pattern: 8x6.5" / 8x165.1 Thread Pitch: M14x1.5 studs & nuts Center Bore: 126.15mm Compatible Vehicles: Dodge 2014-2022 Dodge Ram 2500 2014-2022 Dodge Ram 3500 2014-2018 Dodge Ram 3500 DUALLY Chevrolet 1999-2010 Chevrolet Silverado 2500 1999-2010 Chevrolet Silverado 3500 2000-2010 Chevrolet Silverado DUALLY 3500 1989-2013 Chevrolet Silverado SUBURBAN 2500 1988-2000 Chevrolet Silverado K-2500 1988-2000 Chevrolet Silverado K-3500 1988-2000 Chevrolet Silverado 20 PICKUP 2WD HD 1988-2000 Chevrolet Silverado C-30 PICKUP 2WD 2002-2007 Chevrolet Silverado AVALANCHE 2500 GMC 1988-2000 GMC C-2500 PICKUP 2WD 1988-2000 GMC C-3500 PICKUP 2WD 1988-2000 GMC K-2500 PICKUP 4WD 1988-2000 GMC K-3500 PICKUP 4WD 1997-2000 GMC SAVANA VAN 2500 1997-2000 GMC SAVANA VAN 3500 2001-2010 GMC SIERRA 2500 HD 1999-2010 GMC SIERRA 3500 1999-2010 GMC SIERRA DUALLY 3500 2000-2013 GMC YUKON 2500 HUMMER ALL HUMMER H1 2003-2010 HUMMER H2 Package: 4 Pcs wheel spacers 1pair Protective Gloves 1PCS Cleaning Wire Balls [Important Notes] 1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide. 2. Measure the fender gap and stock bolt length to choose suitable thickness. 3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle. 4. Do not use impact wrench .Please use hand wrench. Recommended to use threadlocker. 5. Returns are only accepted if unused and not installed. (ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE) -- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle. -- For 1 inch or less or special adapters , If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs. -- For 2 inches or more or special adapters , If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small size adapters or purchase longer studs yourself. What should I pay attention to during installation? 1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 3) DO NOT proceed if both of the wheel spacer do not fit. 4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers. 5 ) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident. 7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles. 8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.

  1. We had some issues with shipping -- 1st shipment was returned but seller refunded with no problem and re-sent. I'm very happy with the final result. Seller should change in the description on eBay the shipper to USPS for these smaller packages because shipper is listed as UPS ground for this item. This is what caused the issue. However, overall, I'm very pleased.

    just TDUBB it

  2. This company is a great company to work with. I accidentally sent the wrong address but they worked it out for me and had it sent to my new address. Thankfully. The ball joints that I ordered were packed very well and came to me in good shape. They seem to be good quality. I have not used or installed them yet. Still need to purchase the proper tools to do so.

    Bjorn5ff5261

  3. Perfect transaction! Brand new OEM A/C Compressor (67328) exactly as described. Fits my Scion xD/Toyota Matrix/Corolla 1.8L with no issues. Fast shipping, well-packaged, and excellent communication. Highly recommend this seller!

    Peter Tickle

Related products